| Packing |
- 36 V 13 Ah NiMH Battery Pack consists of three 12V 13 Ah NiMH battery modules in parallel connection by 30 pcs 13Ah F size NiMH battery
- Wrapped by heavy duty Heat shrink tube
|
| Volatge |
36V ( working ) 43V ( peak) |
| Capacity |
13Ah or 468 wh |
| Charging Rate |
Standard 1.8A Max. 6A |
| Discharging Rate |
- Standard rate: 13Amp ( Recommended and
warranted)
Highest rate for continuous running: 40Amp
Max. Rate for short time: 60Amp ( Not recommend as working rate ) |
| Pre-wired |
- 3 Charging terminals: 18AWG wire with mini Tamiya connector female and connect with a 65o thermostat.
- When charging, Please use connector adaptor (included) to connect each 12v module to each channel of charger.
- note: please disconnect the 3 to 1 Tamiya connector during charging
- 3 Discharging terminals: 14 AWG wire standard Tamiya connector male with 30A rating
- When discharging, please use 3 to 1 Tamiya Connector ( included) to connect three 12V Modules in series and form a 36V 13Ah battery pack.
|
| Dimension |
13.25"L x 4"W x 3.5"H |
| Net Weight |
17 lbs |
| Smart Charger (Included) |
|
| Tips |
|
| Applications |
designed for e-bike upto 600 W DC motor |
| Cautions |
- Please don't discharging the battery pack below 30V ( 1.0 V / cell) Deep discharging may damage NiMH battery pack.
- Charging battery
immediatelyevery time it is discharged. Never storage the battery pack at below 30V.
- Please read more safety warning at the link
|
| How to Charge and Use the battery pack: |
- In order to achieve the best power balanceduring charger, you shall charge each 12V battery modules in same time separately.
- In order to discharge, you shall plug 3 to 1 connector (series connected ) into each 12V pack 's plug, then make 36V 13Ah battery pack.
|
