|
Features
- This is an Universal AC to DC adaptor kit, included one switch DC-DC adaptor with output 1.5V, 3V, 4.5V 5V, 6V, 9V, 12V and one AC 100- 240VAC-12DC adaptor.
- Max. Output current: 1000 mA
- It is designed for running most of portable devices from 1.5V - 12V both in home and in car.
- 12 W Max. output.
- 6 pcs detachable round DC plugs are included to fit almost every DC equipment
- 6 coaxis plugs show as below
100 - 240V AC to 12V DC with Car cigarette lighter plug Adaptor:
- Run all 12VDC mobile devices in home and office, 100 - 230V AC worldwide power support
- Input 100- 240V AC 50/60 Hz 0.45A max. Worldwide power support
- Output 12V at 1.5A
- UL listed
About DC Regulating Adaptor ( 1.5V - 12V )
| Input ( VDC) |
11V - 14V |
| Output (VDC) |
1.5, 3, 4.5, 5, 6, 9, and 12V selectable by switch |
| Current |
1000 mA |
| LED Monitor |
Green LED indicate power on |
| Protection |
Short circuit and replaceable fuse for overload |
| Connectors |
Male car plug for input, and Universal two hole for output, with 6 feet long cable |
| DC Plugs |
- 5 coaxis plugs: 1.4 x 3.5, 2.1x5.0 2.5x5.5 1.7x4.0, 0.75x 2.4 ( mm, diameter)
- 1 square connector: 3.5 x 3.5 mm
|
| Applications |
For operate most of personal stereos, CD/MD player, Discman, Electronic games, Multimedia and IT devices in the car |
| Smart Tip |
- Combining a AC-DC 12V adaptor, you run a handhold devices worldwide both in car and home
- Combing with a 11.1V Li-Ion battery pack, you can get external battery for running < 13W handhold devices
- It can be used as a DC regulator to run < 13W HID light with 11.1V Li-Ion battery pack
|
| Size |
4.2" x 1.8" x 1.2" |
| Weight |
3.7OZ |
OPERATING INSTRUCTIONS:
Voltage Selection
1. Determine proper output voltage setting. Check rating plate and the voltage indication marked next to input jack on your device. You may find the voltage in your AC adaptor or in the user's manual.
2. Set the voltage selector switch at your desired voltage.
TIP Polarity Selection
1. Determine proper connector size. determine required tip polarity. reversed polarity can result in permanence damage to your device. Common symbols for tip polarity are shown below:
2. Insert connector output plug into your appliance.
3. Insert car adaptor into vehicle cigarette lighter outlet. Green LED will light to indicate proper operation. If LED fails to light. See FUSE REPLACEMENT.
4. Turn on your appliance. If it does not operate, immediately disconnect and review the above steps.
FUSE REPLACEMENT
To check or replace fuse, simply rotate the plastic tip at the end of adaptor counterclockwise. Visually inspect fuse element. If blown of if you are unsure, replaced fuse(1.5AMP).
|
