|
Combining universal smart charger with mini battery
analyzer, you can monitor RC battery pack's capacity during charging and make sure battery in excellent condition for racing.
Features of Universal Smart Charger
- Universal smart charger can charger any NiMH / NiCd battery pack from 9.6V to 18V with IC detector of battery full charged
- Two levels current selectable at 0.9A and 1.8A. For battery pack 's capacity ( 600 - 1100 mAh, choose 0.9A charging current, for larger capacity pack, choose 1.8A. Don't use it to charge battery with capacity less than 900 mAh
- 100 - 240V AC power input, can be used in worldwide
- Standard Tamiya connector in output end to connect to Mini battery analyzer
- For detail specifications of Universal battery charger, please read here
- One year Warranty
Features of Mini Battery Analyzer
- Measures energy (Wh), charge (Ah), power (W), current (A) and voltage (V) for any rechargeable battery pack from 4 - 60V, including NiCd, NiMH , and SLA, and Li-Ion battery packs
- Connector to use a receiver battery for measurement down to 0 V
- Captures current peaks and voltage minimums (droops)
- Accurate & precise - 0.01 A current and 0.01 V voltage resolutions
- Rugged - handles 50 A continuous and 100 A peak at 60 V
- 16 AWG, 7 x 37 stranded, high temp silicone rubber insulated wire with Tamiya connector to allow you to connect the analyzer to universal charger / and battery pack easily
- Small & Light: 2.8" long x 1.7" wide x 0.83" thick (70 mm x 44 mm x 21 mm), 2.5 oz.
- Precision current sensing resistor, with only 0.001 Ohm resistance and circuitry only draws 0.007 Amps
- One Year Warranty
- Complete User Manual
- For detail specifications of Mini battery analyzer please read here
- Quality made in USA
 to ISO 9001:2000 standards
|
