Chemistry	LiFePO4 in prismatic case
Nominal Voltage	Average 3.2 V (working) 3.65V-3.8V (peak ) 2.0 V ( cut-off low)
Capacity	110Ah (352 wh) at 0.3C rate 100Ah (320Wh) at 2.0C rate
Energy Density	110 Wh/kg
Charging current	C/3 rate (36.6A recommended) 1.0C rate (110A Max Continuous) 3.0C rate (330A Max charge pulse =< 5 milli-sec)
Discharging current	Constant discharge current: 220A (2.0C rate recommended) Max Constant discharge current: 440A (4.0C rate =< 20 sec) Battery capacity will reduce to 95-100Ah Impulse discharge current: 1320A (12C rate < 5 milli-sec) Must utilize a correct contact metal plates, which are compatible with max discharge rate Batteryspace is not responsible for any damage causeed by misunderstanding and misuse!
Terminal	M12.0mm Matrix screw terminal Included 2 pcs M12.0mm Matrix screw Included 1 pc Copper Bar Utilize for make a series / parrallel connection between 2 cells Bar dimension (LxWxH): 90mm(3.5") x 30mm(1.2") x 3mm(0.1")
Dimensions (LxWxH)	145(4.53") x 68mm(2.8") x 220mm(8.7") H with screw: 240mm(9.4") W with Copper Bar:117mm(4.6")
Weight	3.2 kg (7.04 lbs)
Color	Case color may change without notice
Operation Temperature	Charging: 0'C (32F) - 55'C (131F) Discharging: -20'C (-4F) - 55'C (131F) Self-discharging <3% monthly Temperature Durability of case =< 170'C (338F)
Cycle Performance	2000 (80DOD%) / 3000 (70DOD%)
Applications	small EV or big robot
Detail Data Sheet	Please click here to download the specification Please click here to view the discharge curve@26.0A
Smart charger	You can choose our smart charger to recharge Li-Fe-PO4 battery pack after finish build up a high voltage pack by LiFePO4 Prismatic Module: 3.2V 110 Ah
Cautions	This LiFePO4 3.2V module does not have PCM for protection. Do NOT discharge battery below 2.5V, and always store battery above 3.0V To form a high voltage battery pack, please choose our advanced LFP BMS to monitor and control each module for safety and long service life
Warranty	One year limited (Please download and fill the form, then fax it to 510-439-2808. Attn: BatteySpace-Tech or email to tech@batteryspace.com before use)