Packing	12.8V 40Ah LiFePO4 Li-Ion rechargeable battery Module is made of 4 pcs LiFePO4 Prismatic Module: 3.2V 40 Ah in 4S configuration, Stainless Steel, Nylon handle & Plastic Cover on the top The color of Plastic Cover will be different based on availability Acrylic Conformal Coating Technology applied for protect battery pack from Static Electric Shock Over-high pressure load Over-heat Moisture & Dust
Voltage	Voltage: 12.8 V (working) 15.2 V (peak) 10.0 V ( cut-off)
Capacity	40Ah (512Wh)
Cycle life	> 2000 cycles (80% of initial capacity at 1C rate)
Protection	One Balancing PCM (100A limited) installed with the battery pack and protects the battery from Overcharge (> 15.6 V) Over discharge (<8.0 V) Over drain ( >100 Amp) Short circuits Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
Energy Density	75.26Wh/kg
Prewired	Charge / Discharge terminal : 9" long 6 AWG open end wire Red = Positive Black = Negative
Charging rate	13.33A recommended, 40.0A Max
Max. Discharging Rate	100 Amp limited by PCM
Dimensions (LxWxH)	240mm(9.4") x 125mm (4.9") x 225mm(8.8")
Weight	7050grams (15.5Lb )
Smart Tips	Please use Smart Charger (10 A) for 12.8V LiFePO4 Battery Pack world-wide use to charge the pack with 4.8 hrs charging time
Applications	A Perfect 12.8V Battery module with 100A Max drain rate for EV, HEV application You may build battery pack for higher voltage (series connection) or higher capacity (parallel connection) Burn-time = 512Wh / motor's wattage
Warning	For safety issue, please don't remove a White Plastic Cover on the top Please click Knowledge on LiFePO4 battery to learn more detail
Battery Cofiguration (For safety issue, please don't remove a White Plastic Cover on the top )