Packing	12.8V 13.6 Ah LiFePO4 Li-Ion rechargeable battery Module is made of 16 pcs hi power LiFePo4 3400 mAh cylindrical cells in 4S4P configuration Protected by 2 pcs PCM (13A limited) Battery pack is installed in Water Proof / Fire Retardant Aluminium Enclosure: 125 x68x180 (mm) (BX-AC-120062-165)
Voltage	Voltage: 12.8 V (working) 15.2 V (peak) 10.0 V ( cut-off)
Capacity	13.6 Ah (174.08 Wh)
Cycle life	> 2000 at 1C rate ( 2 times more than NiMH , and 10 times more than SLA)
Protection	Two PCB (13A limited) installed with the battery pack and protects the battery from Overcharge (> 15.2V) Over discharge (<10.0 V) Over drain ( >26 Amp) Short circuits
Pre-wired	Discharge terminal: 6" long 14 AWG open wire end Red wire = Positive Black wire = Negative Charge terminal: 4" long 18AWG open wire end Red wire = Positive Black wire = Negative
Charging rate	13.6A Max
Max. Discharging Rate	26A limited by 2 PCB Max.
Dimensions (LxWxH)	184mm(7.2") x 125mm(4.9") x 67mm(2.6")
Weight	1769 grams (3.9 Lb )
Warranty	Limited Warranty: Repair or exchange only within 30 days.
Smart Tips	You may choose our 1.5A smart charger for 12.8V Li-Fe-PO4 pack to recharge this battery pack. The estimated charging time is 12.8 hours You can use 3A 12.8V LFP battery charger to charge the battery pack . Charge time is about 6.4 hours
Applications	Replace 12V NiMH or Lead acid battery pack with longer cycle life External battery pack to run 12V DC devices with 26 A Max current drawn, such as electric scooter, e-bike etc
Warning	12.8V LiFePO4 battery pack shall be cut-off at 10 V during charging and 20.0V during discharging Must charge the pack via only charging terminal. Please click Knowledge on LiFePO4 battery to learn more detail