Packing	7.4V, 9600mAh Li-Ion battery , is made of 8 pcs 2400mAh 18650 Li-Ion cylindral cells ( 4 parallel / 2 series) The battery pack is wrapped by heavy duty heat shrinked tube Two terminals from the battery pack Charging terminal: to charging battery Discharging terminal: regulate peak voltage below 8V and connect to light
Voltage	Voltage: 7.2V (working) 7.9 V ( peak) 5V ( cut-off)
Capacity	9600 mAh min. (91 wh)
Protection	Two PCB (8A) installed with the battery pack and protects the battery from Overcharge (>12.6V) Overdischarge ( < 7.5 V) Over drain ( > 16 Amp) Short circuits 9 Amp polyswitchhes installed to limit max. discharging current at 9 A and to protect wrong polority
Prewired	Discharging terminal: 4' long Trail-Tech Coaxis Female Plug for charge/discharge terminal Excluded Trial-Tech Coasxis Male plug, please click here to buy seperately. It is used for connect to the light by yourself if the light connector won't match our lockable 2 pin female plug battery. Charging terminal: 2" long Universal two pin female plug Excluded two pin male water proof connector, please click here to buy seperately. It is used for connect to the light by yourself if the light connector won't match our lockable 2 pin female plug battery.
Max. Discharging Rate	9Amp limited by two polyswitch
Dimensions	40 (W) x 75 (H) x 80 (L) mm
Weight	13.5 Oz
Smart Tips	You shall choose 1A Universal Smart Li-Ion battery charger to recharge this battery pack. The estimated charging time is 12 hours If you would like to use this charger in your car, you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere. Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly , in case our universal connectors can not fit your light. Burning time for light is estimated as follow: 10W HID light ( Lupine Endison ) 9 hours 20W Halogen Light: 3.5 Hours hall choose
Applications	Specially designed for replacing battery of Lupine HID bike lights, and 6V NiMH battery pack for halogen light Can replace most 6V NiMH or 7.2V Li-Ion battery. Please note using a 7.4V battery to light a 6V bulb might short the life span of the bulb. including, Light@ Motion: conmute&Solo logic Niterider: Headtrip Nightpro: Elite, torch, KAMIKAZE Cygolite: Rover Viewpoint Nightsun Team Lupine Edison Please note using a 7.4V battery to light a 6V bulb might short the life span of the bulb. You can order our 6V bulb here
Warning	Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks) . Always charge battery with attention. Battery pack shall be placed on a fire-prrof place to avoid any accident Please check battery polarity before plug battery into light. Never make wrong polority connection. Please check For safety warning please see the link here