| Packing |
-
14.8V , 7200mAh battery pack is made by 12 pcs High quality 18650 2400mAh Li-Ion cells packed by 4 series and 3 parallel (4S3P), with three PCB
-
The battery pack is Wapped by white PVC shrink tube |
| Voltage |
Voltage: 14.8V (working) 16.8V ( peak) 11.0V ( cut-off) |
| Capacity |
7200 mAh min. (106 wh) |
| Protection |
- 3 PCB (6.5A) installed with the battery pack and protects the battery from
- Overcharge (>12.6V)
- Overdischarge ( < 7.5 V)
- Over drain ( > 19 Amp)
- Short circuits
- Three 4.2 Amp polyswitch installed to limit max. discharging current at 7A
|
| Prewired |
- 6" length 16 AWG wires without connector
|
| Max. Discharging Rate |
12 Amp limited by polyswitch |
| Dimensions (LxWxH) |
212mm (8.3") x 40mm (1.6") x 36mm (1.4") |
| Weight |
1.35lb (612grams) |
| Smart Tips |
|
| Applications |
- Designed for running 12V Halogen or HID bike light with extra burning time up to 90W
- Burn time for 13W / 12V super bright HID or halogen light is about 8 Hrs, or 26W dual beam HID light for 4 hrs
- Can replace almost every bike lighting system on the market, such as Nite-Rider, Light & Motion, Turbo Cat, Night Sun, Marwi, BLT, Vista, Cygolite, Nite Hawk, or Performance View Point at better quality and much lower price.
|
| Warning |
- Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks) .
- Always charge battery with attention. Battery pack shall be placed on a fire-prrof place to avoid any accident
- Please check battery polarity before plug battery into light. Never make wrong polority connection. Please check
- For safety warning please see the link here
 |
| Pack Configuration |
  |
