| Packing |
|
| Voltage |
Voltage: 14.8V (working) 16.8V ( peak) 11.0V ( cut-off) |
| Capacity |
4400 mAh min. (65.12 wh) |
| Protection |
- One PCB (8A) installed with the battery pack and protects the battery from
- Overcharge (>16.8V)
- Over discharge ( < 11.0 V)
- Over drain ( > 8 Amp)
- Short circuits
- One 4.2A polyswitch installed to limit max. discharging current at 4.2A and to protect wrong polarity
|
| Pre-wired |
|
| Max. Discharging Rate |
4.2 Amp limited by polyswitch |
| Dimensions (LxWxH) |
2.65" (67.3mm) x 1.5" (38.1mm) x 3.0" (76.2mm) |
| Weight |
368 g ( 12.9 Oz ) |
| Smart Tips |
- You may choose our 14.8V (1.8A, UL listed) Smart Li-Ion battery charger to recharge this battery pack.
- Charging time = 3.7 hours.
- Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly , in case our universal connectors can not fit your light.
- If you would like to use this charger in your car, you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere.
|
| Applications |
|
| Warning |
- Li-Ion battery may exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improperly
charging/discharging, any changes of this battery pack, misassembling battery packs) .
- Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident
- Please check battery polarity before plug battery into light.
- For safety warning please see the link here
|
