Packing	25.9 V 10 Ah pack is made by 7 pcs High power Polymer Li-Ion cell of 3.7V 10000mAh batteries with 50Amp drain capability Battery pack is placed in Plastic Enclosure (10-22) to protect battery from impact and firing Fuel Gauge for PCB of 25.9v Li-Ion Battery Pack (7 cells pack) is installed on surface of battery pack Touch the switch on the display , you can monitor the energy level of battery pack Included one Digital Camera Bag 5.5x4.5x7.5 Included one 3.0A Smart charger for only 25.9V Li-ion pack 5 hrs charge time
Voltage	25.9 v (working) 29.4 V ( peak) 17.5V ( cut-off)
Capacity	10000 mAh ( 259 wh)
Pre-wired	One PCM with balance function is installed in the battery pack to balance charging and protect battery module from Overcharge beyond 29.4V Over-discharge below 19.6V over drained beyond 40A Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack. Discharge terminal: Copper Barrel Lug terminal attached via Binding Post Barrel Lug terminal size (LxWxH): 0.6" (14mm) x 0.3" (8.0mm) x 0.04" (1.0mm) Binding Post size (DxL): 0.8" (19mm) x 1.2" (30 mm) Red Binding Post = Positive Black Binding Post = Negative Must use proper AWG wire gauge to match the max discharge current (40A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table. You may consider to DIY with our wire below. 10AWG Red wire and 10AWG Black wire. 12AWG Red wire and 12AWG Black wire. Charge terminal: 5" long Standard Tamiya Male plug
Max. Discharging Rate	40 Amp limited by PCM
Dimensions	232mm (9.2") x 120mm (4.8") x 75mm (3.0") L include the Binding Post's length
Weight	4 lb
Smart Tips	Need fast smart 3.0A charger (5.0 hrs charge time)? Please click here to order. Must plug the charger to the battery pack with correct polarity. Batteryspace.com will not be resonsible for any damage caused by misusing. If you connect two of these modules in parallel, you can build a 25.9V 20 Ah Battery pack with a 80 Amp discharge rate with suitable wiring. Need a connector ? please find one here Optional for Fire Retardant Bag: 295mmx230mmx75mm. Please click here to order. Included Quality Multi Departments Bag 5.5x4.5x7.5". Need more? Please buy separately here.
How to charge the pack by included 3.0A charger
Applications	Autonomous submarine to drive a 24V DC motor Replace 24V NiMH battery pack for e-bike Wheel Chair Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know more the advantages
Warning	Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by using battery packs. Please never discharge the battery pack beyond its Max. rating Must read before place an order. Please download fill the form . We reserve the right to not sell the battery to any one if we feel they cannot handle Li-Ion battery safely For safety warning please see the link here Please allow us to deliver the battery pack in 2-3 weeks after receipt payment because it need to be tested before shipping
Warranty	Limited Warranty: Repair or exchange only within 30 days.