| Packing |
|
| Voltage |
Voltage: 14.8V |
| Capacity |
2400 mAh |
| Protection |
- One PCB (6.5A) installed with the battery pack and protects the battery from
- Overcharge (>16.8V)
- Over discharge ( < 11.0 V)
- Over drain ( > 8 Amp)
- Short circuits
- One 4.2 Amp polyswitch installed to limit max. discharging current at 4.2A and to protect wrong polarity
|
| Prewired |
- 12" length 18 AWG wire installed with pack without connector
- If you need a connector, please find one here
|
| Max. Discharging Rate |
4.2 Amp limited by polyswitch |
| Dimensions |
38 mm W x 135mm L x 20 mm H |
| Weight |
7 oz |
| Smart Tips |
- You may choose our 14.8V Universal Smart Li-Ion battery charger to recharge this battery pack.
- Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly , in case our universal connectors can not fit your light.
- If you would like to use this charger in your car, you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere.
|
| Applications |
|
| Warning |
- Li-Ion battery may be exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling battery packs...) .
- Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident
- Please check battery polarity before plug battery into light. Never make wrong polarity connection.
- For safety warning please see the link here
|