| Packing |
|
| Voltage |
Voltage: 14.8v (working) 16.8v (peak) 11.0v (cut-off) |
| Capacity |
4400 mAh min. (65.12 wh) |
| Protection |
- One PCB (8A) installed with the battery pack and protects the battery from
- Overcharge (>16.8V)
- Over discharge ( < 11.0 V)
- Over drain ( > 8 Amp)
- Short circuits
- One 7A polyswitch installed to limit max. discharging current at 7A and to protect wrong polarity
|
| Pre-wired |
|
| Max. Discharging Rate |
7 Amp limited by polyswitch |
| Dimensions (LxWxH) |
5.8" (147mm) x 0.8" (20mm) x 2.9" (74mm) |
| Weight |
368 g (12.9 Oz) |
| Smart Tips |
-
- You may choose our 14.8V (1.8A, UL listed) Smart Li-Ion battery charger to recharge this battery pack.
- Charging time = 3.7 hours.
- Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly , in case our universal connectors can not fit your light.
- If you would like to use this charger in your car, you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere.
|
| Applications |
|
| Warning |
- Li-Ion battery may exploded if misusing. We are not responsible for any damages or losses caused by misusing (included but not limited to: improperly charging/discharging, any changes of this battery pack, misassembling battery packs) .
- Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident
- Please check battery polarity before plug battery into light.
- For safety warning please see the link here
 |
