Packing	11.1v Li-Ion rechargeable battery made of 9 pcs 18650 2600mAh Li-Ion cells (3S3P) with PCB and polyswitch for full protection The battery pack is wrapped by heavy duty heat shrink
Voltage	Voltage: 11.1v(working) 12.6v(peak) 7.5v(cut-off)
Capacity	7800mAh (86.58wh)
Protection	One PCB (10A) installed with the battery pack and protects the battery from Overcharge (>12.6v) Overdischarge (<7.5v) Over drain (>10Amp) Short circuits One 7.0 Amp polyswitch installed to limit max. discharging current at 8.4 A and to protect wrong polarity
Prewired	6'' length wire (16 AWG) installed with the battery. One Fuel Gauge for PCB of 11.1v Li-Ion Battery Pack (3 cells pack) Touch the switch on the display , you can monitor the energy level of battery pack Free Standing, not mounted.
Max. Discharging Rate	7 Amp limited by one polyswitch
Dimensions	3.75" L x 2.8" W x 1.5" H
Weight	16 oz
Smart Tips	You may choose our 1.5A Universal Smart Li-Ion battery charger + the connector adaptor to recharge this battery pack. The estimated charging time is 7.2 hours If you would like to use this charger in your car, you can choose our 110W DC-AC inverter, then you can charge your RC battery everywhere. Please keep your old bike lighting connector. You may need to link our wire to a special connector to make your lighting work properly.
Warning	Li-Ion battery may be exploded if mis-using. We are not responsible for any damages or losses caused by misusing (included but not limited to: mis-charging, mis-discharging, any changes of this battery pack, mis-assembling batterypacks) . Always charge battery with attention. Battery pack shall be placed on a fire-proof place to avoid any accident Please check battery polarity before plug battery into light. Never make wrong polarity connection. Please check For safety warning please see the link here