500W Amplifier CBA Battery Analyzer

500W Amplifier CBA Battery Analyzer


  • The CBA amplifier is an add-on accessory for a CBA designed primarily for commercial users or that must test smaller batteries at or near the destructive limits. It also may be used for testing large lead acid batteries used in power backup applications and for FAA aircraft battery test requirements. Competition modelers may wish to have and amplifier for high rate testing but it is not needed for the average modeler.

  • The amplifier is a very simple in concept. It is a DC amplifier that connects to a CBA and amplifies and regulates discharge current of the CBA times 10. It increases the 100 watt continuous capability of the CBA to 500 watts! It will allow testing of a single nickel cell at 160 amps and regulate that current all the way down to .9 volts. A single Lithium cell may be tested at 120 amps!

  • Notice: Must order CBA separately (please click here) to use with this amplifier

FEATURES
  • Test at 10X current using the amplifier in between a CBA and your battery. ( CBA is not included )
  • Perform tests quickly at or near destructive limits; up to 500 watts or 160 amps maximum, whichever is higher!
  • A special version of the CBA software is downloadable to do the proper 10X calculations with one or two amplifiers.
  • Test a Lithium cell at up to 120 amps / 500 watts. e.g (battery voltage x discharging current ) <= 500
  • Test a Nickel cell at 160 amps regulated down to .9 volts.
  • Test batteries at or near their limits.
  • Superior constant current testing ,electronically regulated amplification, using an amplified six FET electronic load.
  • Automatic fan operation whenever current is sensed from the CBA with a cool down cycle.
  • May be left in line and switched off for normal CBA operation at lower discharge rates.
  • Supplied with copper bus 5/16 bronze bolt battery connections and plug in Power pole CBA connector
  • Included 1 pc AC to DC adaptor (for USA only)

click for larger picture

Specifications:

  • Maximum continuous discharge rate: 500 watts per amplifier. ( You can get 1000W discharging rate if connect two amplifiers together in parallel )
  • Discharge rate amplification typically 10X +- 1%
  • Absolute maximum operating voltage: 48 Volts
  • Maximum discharge rate: 160 amps (3.12 Volts at test start) (Battery dependant)
  • Minimum Voltage for a 160 amp discharge: .9 volts at completion of test (Battery dependant)
  • Supplied with copper bus 5/16 bronze bolt battery connections and plug in Power-pole CBA connector.
  • On/off/bypass switch. On and over temperature LED indicators, viewable from across a room.
  • Automatic fan operation senses 1 amp or more current from the CBA. Stays on approximately 5 minutes after test completion.
  • Dimensions (overall): 5.5" H x 6.25" W x 13.75" D.
  • Weight: 134 oz.

Price: $628.95
Buy Product Online | Visit Store Home
   

  Related Products


  Digital Multi-Meter - A830L --- Must have for DIY - Digital Multi Meter - A830L --- Must have for DIY
  CH-V9688 Computer Controlled Superfast Universal LCD Smart Charger + 8 pcs C size 5000 mAh NiMH Batteries  - CH-V9688 Computer Controlled Superfast Universal LCD Smart Charger + 8 pcs C size 5000 mAh NiMH Batteries
  Computerized Battery Analyzer for Any Battery Pack up to 150W or 40Amp with Software - Computerized Battery Analyzer for Any Battery Pack up to 150W or 40Amp with Software
  DC Programmable Electronic load: 30A, 150W  - DC Programmable Electronic load: 30A, 150W
  Multi-Current Universal Smart Charger w. Compact Digital Battery Analyzer for any 9.6 -18V NiMH / NiCd Power Packs - Multi-Current Universal Smart Charger w. Compact Digital Battery Analyzer for any 9.6 -18V NiMH / NiCd Power Packs


 Other Items from Battery Analyzers

  Portable Digital Temperature Calibrator with USB and RS232 Interface & Software - NIST certificated  - Portable Digital Temperature Calibrator with USB and RS232 Interface & Software - NIST certificated
  Computerized 2 Channels Battery Analyzer (50V 10A/ Channel, 1000W total ) for High Power Rechargeable Battery Packs  - Computerized 2 Channels Battery Analyzer (50V 10A/ Channel, 1000W total ) for High Power Rechargeable Battery Packs
  Compact Digital Battery Analyzer for Any 4-60V Rechargeable Battery Pack up to 50Amp - Portable Digital Battery Analyzer for Any 4-60V Rechargeable Battery Pack up to 50Amp
  Universal Smart Charger With Mini Battery Analyzer / Monitor for 19.2V - 24V, NiMH/ NiCd Battery Packs - New!!! - Universal Smart Charger With Mini Battery Analyzer / Monitor for 19.2V - 24V, NiMH/ NiCd Battery Packs - New!!!
  Computerized 8 Channels Battery Analyzer for QC All types RechargeableCells upto 5V (6mA - 3A) - Computerized 8 Channels Battery Analyzer for QC All types RechargeableCells upto 5V (6mA - 3A)
  DC Programmable Electronic load: 30A 120V / 240A / 2400W - DC Programmable Electronic load: 30A 120V / 240A / 2400W
  BK-300 Precision Internal Resistance Tester for All Batteries with 1 m-ohm accuracy - BK-300 Precision Internal Resistance Tester for All Batteries with 1 m-ohm accuracy
  Computerized 8 Channels Battery Analyzer for QC All types Rechargeable Packs upto 30V 10A / Channel - Computerized 8 Channels Battery Analyzer for QC All types Rechargeable Packs upto 30V 10A / Channel
  Digital Clamp Multimeter - UT201 --- Must have for DIY - Digital Clamp Multimeter - UT201 --- Must have for DIY
  500W Amplifier CBA Battery Analyzer - 500W Amplifier CBA Battery Analyzer
  Multi-Current Universal Smart Charger w. Compact Digital Battery Analyzer for any 9.6 -18V NiMH / NiCd Power Packs - Multi-Current Universal Smart Charger w. Compact Digital Battery Analyzer for any 9.6 -18V NiMH / NiCd Power Packs

 
  Return To BatterySpace.com/AA Portable Power Corp. Tel: 510-525-2328

 

 
shopping carts
Shopping cart powered by MonsterCommerce e-commerce software.