Universal Smart Charger With Watt Up Meter for 19.2V - 24V, NiMH/ NiCd Battery Packs

Combining universal smart charger with mini battery analyzer, you can monitor RC battery pack's capacity during charging and make sure battery in excellent condition

Universal smart charger (1.5A) for 19.2V - 24V NiMH / NiCD battery pack

• Universal Fast and Smart Charger  is designed for charging any  19.2V - 24V NiMH and NiCd Battery Packs with capacity > 1500mAh (16-20 Cells pack)
• 100-240V AC input for worldwide use.
• The charger can cut-off power Automatically by negative delta V IC when battery pack is fully charge.
• Battery will be charged at 1.5A constant current
  • For 3 Ah battery pack,  charging time is about 2.5 hrs.
  • For 13Ah battery pack, charging time is about 10 hrs.
• Protection fuse for over current, short circuit & reverse polarity protection.
• One standard Tamiya female connector installed with the charger. You will need to order the connector adaptor for our battery pack that has a mini male charging terminal.
• One set connector adaptor from Standard male tamiya to Clips is  included for charging any battery packs.  
• Included one pc temperature sensor (BEC female plug) for DIY a 19.2V-26.4V battery pack's temperature sensor terminal , which must be plugged to a charger's temperature sensor plug(BEC male connector)
• It is a very smart charger.  Just plug it in and wait for the battery to get charge.
• The charger is designed for fast charging any 19.2V - 24V Nicd and NiMH battery packs. Ideal for 19.2V - 24V battery pack for E-bike, E- scooter and hunting light
• Dimension: 2.0"H X 2.7"W X 5.8"L.
• Weight: 15 OZ. (426 grams) 

• Measures electronic Parameter below
• Voltage (V) 
• Current (A)
• Power (W)
• Electronic Charge (mAh)
• Electronic charge is a physical property of matter, which causes to experience a force when near other electrically charged matter
• Temperature ('C)
  
• Measures peak Amps, peak Watts ,voltage minimum (sag), peak temperature.
• Measures temperature in both Celsius & Fahrenheit
  
  • Optional temperature sensor probe (excluded)
    
• Auxiliary battery to power watt meter for measurement down to 0V
  • Optional Auxiliary battery probe (excluded)
    
• Accurate & precise – 0.01 A current and 0.01V voltage resolutions
• Rugged – handles 50A continuous and 100A peak at 60V
• Small & light with a tough plastic case
• Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance
• Factory calibration stores constants in EEPROM to compensate for component tolerances