About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Smart Charger (20A) for 3.2V LiFePO4 Battery Pack - CE listed

Your Price: $106.00
In Stock

Product ID # 6379
Part Number:


  • Intelligent charger designedto charge 3.2V LiFePO4 battery pack with capacity >= 20Ah
  • CCCV charging mode, and power off when battery voltage reaches 3.65V
  • Charge time = (Ah rate of the pack x 1.41) / 18A charge current
Input Voltage  100V-240V AC input for worldwide power support
Output Voltage  3.65 VDC
Charging current  20A
Protection  Short Circuit / Over-voltage protection
LED Indicator
  • Green = Power On
  • Red = Charging
  • Green = Fully Charged
Connector  Alligator clips
Dimension(LxWxH)  125mm(4.92") x 77mm(3.03") x 46mm(1.81")
Weight  1.7lb (771g)
Certification  CE Listed

Please download the Specification here


  • Charge 3.2V LiFePO4 rechargeable battery >= 20Ah only
  • Do not expose the product to rain or humidity to prevent from electric shock
  • It is normal if the product gets slightly hot in using
  • Must disconnect ac power (input power) if battery is disconnected for > 3min to reset the charger
  • Make sure the charge DIY wire will be acceptable for 20A Max chargecurrent. Please click here to see American Wire Gauge table and AWG Electrical Current Load Limits
  • Keep the product out of the reach of children
  • Do not open the charger and touch any part of the product to prevent from electric shock
  • Wrong polarity will damage the charger, and Batteryspace are not responsible for the damage orlosses caused by misusing.
  • Please connect charger to AC power before connect to battery pack. Otherwise, the charger will NOT charge the pack and you will not get a RED LED indicate charging.

Related Products

Product Reviews

(0 Ratings, 0 Reviews)

Thermal Spread Material used in Battery Pack Assembly
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Thermal Abuse Test for IEC62133
Lithium Battery Shipping Regulation
Show & Conference
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
32nd International Battery Exhibit, Mar.9-12,2015, Florida, Booth #209
More ...
Mailing Lists