About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award
Security Verified Seal

Smart Charger (15 A) for 51.2V ( 16 cells ) LiFePO4 Battery Pack with CAN connector (110V Only, Standard Anderson plug) Full support BMS

Your Price: $182.00
In Stock

Product ID # 6795
Part Number:

New Page 4
  • This charger is power factor corrected, which exhibit high efficiency
  • Has CAN communication or digital alarm output.
  • Interfaces with BMS Management System via CAN Communication or 12V digital alarm output
  • Suitable for 16-cell pack (connected in series)
  • Fan cooled
  • Power Factor: > 0.75
  • Efficiency: > 72% 
  • For Battery capacity ≥40Ah
  • 95 to 130 VAC, 40~60Hz
  • 56.8VDC / 15A Max
  • Overload
  • Over-voltage
  • Over-heating
  • Short circuit
  • Reverse polarity
LED Indicator
  • 6 LED indicator installed to indicate "Initial", "Ready to charge/ Wrong polarity connection", "Perform Charging/ Correct Polarity connection / 20% - 100% Fully Charge" status
    • Initial: All 6 LED indicator "Flashing" for 5 sec
    • Ready to charge/ Wrong polarity connection: 1st green LED = Solid green, Red LED = "Flashing Red"
    • Perform Charging/ Correct Polarity connection: 1st green LED = "Flashing Green", Red LED = "Off" (Cooling Fan turn on)
      • 20% full charge: 1st green LED = "Solid Green", 2nd green LED = "Flashing Green", Red LED = "Off"
      • 40% full charge: 1st & 2nd green LED = "Solid Green",  3rd green LED = "Flashing Green",  Red LED = "Off"
      • 60% full charge: 1st  & 2nd & 3rd green LED = "Solid Green" , 4th green LED = "Flashing Green", Red LED = "Off"
      • 80% full charge: 1st & 2nd & 3rd  & 4th green LED = "Solid Green", 5th green LED = "Flashing Green", Red LED = "Off"
      • 100% full charge: 1st & 2nd & 3rd & 4th &5th green LED = "Solid Green",Red LED = "Off"
Accessories (Included)
  • 210mm(8.3") x 174mm(6.9") x 76mm(3.0")
  • 5.0 lbs 5.6Oz (2430 grams)
Data Sheet
  •  Charge 51.2V LiFePO4 rechargeable battery >= 40Ah only   

  • Do not expose the product to rain or humidity to prevent from electric shock 

  •  It is normal if the product gets slightly hot in using  

  •  Keep the product out of the reach of children  

  •  Do not open the charger and touch any part of the product to prevent from electric shock

  • Wrong polarity will damage the charger, and Batteryspace are not responsible for the damage or losses caused by misusing

    Please plug in AC power first, then connect the battery to the charger, otherwise, there is no output from the charger.

Related Products

Product Reviews

(0 Ratings, 0 Reviews)

Thermal Spread Material used in Battery Pack Assembly
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Thermal Abuse Test for IEC62133
Lithium Battery Shipping Regulation
Show & Conference
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
32nd International Battery Exhibit, Mar.9-12,2015, Florida, Booth #209
More ...
Mailing Lists