Smart Charger (10 A) for 12.8V LiFePO4 Battery Pack, Worldwide use, CE listed

• Alligator Clip is installed in output terminal with cable

  • Red Alligator Clip = Positive

  • Black Alligator Clip = Negative

  • Must connect to battery with correct polarity. Batteryspace.com will not responsible for any damage by miss-use

Specifications

• INPUT
  • 100-240VC Worldwide power input support by Adjustable switch
    • 115VAC Switch for USA use
    • 230VAC Switch for international use
    • Must adjust switch with correct AC Power input. Batteryspace.com will not responsible for any damage by miss-use
  • Input frequency 50-60Hz
• CHARGE
  • The Battery range is between 10AH to 60AH
  • Charging current: 10.0A
  • Protection
    • Over current protection
    • Over voltage protection
    • Short circuit protection
    • Battery Reverse connect protection
  • The charger will cut off automatically if battery is fully charge
    • Cut-Off voltage = 14.6 +/- 0.3VDC (3.65 +/- 0.08VDC per cell) 
• OUTPUTS: 14.6V +/- 0.3VDC
  
• LED Status: 
• Start Mode: AC LED(~ LED) green with cooling Fan turn on
• Approximate fully charge time = (Battery pack capacity in Ah x1.41) / 10 Ah

Status                                  AC LED (~ LED)                         Batt LED

• Operation temperature: 0 'C - +40'C
• Operation humidity: 20% - 90%
• Storage temperature: -40'C - 70'C
• Storage humidity: 10% - 95%
• Dimension: 155mm (6.1") x 84mm (3.3") x 50mm (2.0")
• Weight: 590g (1.0 lb 4.8 Oz)
•  Please click here to download operation manual 

Caution:

• The charger is designed for indoor use only.
• The charger should be horizontally place and operate in well ventilated condition, avoid from wet and keep it away from inflammable explosive material.
• Please do not disassemble the charger due to high voltage inside