Smart Charger (1.5A) for 3.7V Li-ion/Polymer Rechargeable Battery Pack (5.5mmx2.1mm Barrel Plug) -- CE/UL listed

Smart  3.7V Battery Charger for Li-Ion Battery Pack.

• Manufacture part# 3P10-L1004
• Designed for charging 3.6 V ( 3.7V Nominal)  Li-Ion and Polymer Li-Ion battery pack with capacity > 1500 mAh 
• Input: AC 100--240V AC 50-60Hz 0.2A worldwide power acceptable
  • Need additional AC-AC power plug adaptor for international use? Please click here to order seperately
• 1.5 A  Max. charging current.  Power will be cut off automatically when battery fully charged at 4.2V
• Connector: 5.5mm x 2.1mm Male Barrel plug
  • Need 5.5mm x 2.1mm Female plug for DIY? Please click here to order.
  • Must DIY with correct polarity
    • Inside Barrel = positive
    • Outsaide label = negative
  • Included oneConnector Adaptor: from 5.5mm x 2.1mm female Barrel plug to Clips
  • Need to charge two pin female universal plug's pack? Please click here to order the connect adaptor separately.
  • Need to charge Standard Male Tamiya plug's pack? Please click here to order the connect adaptor separately.
• Charging mode:  CCCV ( constant current, then constant voltage at 4.2V, cut-off power when current reduce to zero )
• Protection: Output shorted and overload protection  
• LED Indicator: 
  • Red - Charging 
  • Green - Fully charged 
• Efficiency: >70 %  
• Operate Temperature: -10^oC(14^o F) ~ +40^oC(104^o F)  
• Humidity: <+90
• Dimension(LxWxH): 80mm(3.2") x 53mm(2.1") x 30mm(1.2") 
• Weight: 6.6 Oz (190 grams) 
• CE / UL listed
•   Please click here to download the specification.

• Check battery polarity before connecting to charger. We are NOT liable for any damage due to wrong polarity!
• This is for 3.7V Li-Ion/Polymer battery with capacity  >1500mAh 
• Indoor use only! Please avoid water
• High-voltage inside charger, Do NOT open the cover as it will void the warranty
• One year warranty 

5.5mm x 2.1mm Barrel connector

One connector Adaptoris included.