About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award

Security Verified Seal

Protection Circuit Module (PCM) with Equilibrium Function for 7 cells (22.4V) LiFePO4 Battery Pack at 20A limited

Your Price: Call for Price & Delivery
100pcs minimum

Product ID # 6101
Part Number:

Protection Circuit Module Specifications  For 22.4V LiFePO4 Battery Packs(7 cells)

This protection circuit is specially designed for 22.4V LiFePO4 Battery pack with 20 A discharging rate.  Different with normal PCB, it provides equilibrium function during charging, e.g. PCM will detect each cell's voltage and trim higher voltage until other cell's voltage reach same, therefore allow Li-ion cell has longer service life. Also the PCM  will provide the following protections:

  • Keep 22.4V  LiFePO4 Battery pack from overcharge ( 3.90 V/cell )
  • Balance each cell at Max. 3.60V/cell +/-0.3V ( required voltage tolerance within 0.2V for each cell)
  • Keep 22.4V  LiFePO4 Battery pack from over-discharge (2.00V/cell)
  • Limit 22.4V  LiFePO4 Battery pack's discharging current below 20 A.


  • Manufature part# PCM-L07S25-407
  • Apply for 7 Cells  LiFePO4 Battery pack with discharging current  < 20A
  • Internally Trimmed Charge and Discharge Voltage Limits to balance each cell  
  • Resistance =< 20milli-ohms
  • Dimension (LxWxH): 150mm(5.9") x 60mm(2.4") x 10mm(0.4")  
  • Weight: 9.5Oz (269 grams)


  • Please don't use the PCM for lower capacity or low drain LiFePO4 pack.  Make sure your LiFePO4 Battery pack can handle 20A drain current before buying
  • To achieve balance, each cell in battery pack must has equal voltage within tolerance of 0.2V.
  • You must be professional in LiFePO4 battery pack to buy the PCM. Misusing PCM may cause battery damage or explode.  We are not responsible for any damage caused by user.

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Thermal Spread Material used in Battery Pack Assembly
Show & Conference
The BatteryShow 2016, Sept 13-15, 2016, Novi Michigan, Booth#1716
33rd International Battery Exhibit, March 21-24, 2016, Florida, Booth#412
Lithium Battery Power and Safety, Baltimore MD, Nov 17-19, 2015
The Battery Show, Novi. MI, Sept 15-17, 2015 Booth#1716
Battery Power 2015, Denver, CO, August 5-6, 2015 Booth#29
Next Generation Batteries Conference, San Diego, CA, April 21-22, Booth#9
More ...
Mailing Lists