Protection Circuit Module (PCB) for 1 cell (3.2V) LiFePO4 Battery Pack at 7A limited

PCB Protection Circuit Module Specifications  For 3.2V LiFePO4 Battery Pack (1 Cell pack)

This protection circuit is specially designed for 3.2VLiFePO4 Battery pack with 7A discharging rate.  

• Keep 3.2V  LiFePO4 Battery pack from overcharge ( 3.90 +/- 0.025V )
• No over discharge protection
  
• Limit 3.2V  LiFePO4 Battery pack's discharging current below 7A.

Features:  

• Manufacture part# PCM-L01S03-280
  
• Apply for 1 Cell  LiFePO4 Battery pack with discharging current  < 4A
• Maximum Continuous charging & discharging current: 7.0A
  
• Dimension (LxWxH): 28mm(1.1") x 5.0mm(2.0") x  3.0mm(0.1")
• Weight:  0.15Oz (4.25 grams)
• Need other customized voltage of PCB/PCM with different size? Please click below to order
• Customized 2 Cells PCB for 7.4V Li-Ion / 6.4V LiFePO4
• Customized 3 Cells PCB for 11.1V Li-Ion / 9.6V LiFePO4
• Customized 4 Cells PCB/PCM for 14.8V Li-Ion / 12.8V LiFePO4
• Customized 5-8 Cells PCB/PCM for 18.5V-29.6V Li-Ion / 16V-25.6V LiFePO4
• Customized 8-16 Cells PCB/PCM for 29.6V-59.2V Li-Ion / 25.6V-51.2V LiFePO4
• Customized 16-26 Cells PCB/PCM for 59.2V-96.2V Li-Ion / 51.2V-83.2V LiFePO4

Warning:

• Make sure your LiFePO4 Battery pack can handle 7.0A drain current before buying
• You must be professional in LiFePO4 battery pack to buy the PCB. Misusing PCB may cause battery damage or explode.  We are not responsible for any damage caused by user.