Multi-Current Universal Smart Charger with Watt Up Meter for any 9.6 -18V NiMH / NiCd Power Packs

Combining universal smart charger with mini battery analyzer, you can monitor RC battery pack's capacity during charging and make sure battery in excellent condition for racing.

• Universal Fast Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 9.6V - 18V, for 8 to 15 cells pack.
• LED flashing red-green-red before charging (no battery connection) in order to test the IC of the charger if ready to use.
• It is a very smart charger.  Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged 
• Short circuit protection: No output voltage from the charger if the battery is not connected.
• 120-240V AC input for worldwide use.
• Built in temperature sensor to double ensure the battery pack from overcharged
• Extra battery temperature sensor wire included for your battery which do not have thermostat build in the battery. You need to DIY to add wire on you battery if necessary.
  

• Measures electronic Parameter below
• Voltage (V) 
• Current (A)
• Power (W)
• Electronic Charge (mAh)
• Electronic charge is a physical property of matter, which causes to experience a force when near other electrically charged matter
• Temperature ('C)
  
• Measures peak Amps, peak Watts ,voltage minimum (sag), peak temperature.
• Measures temperature in both Celsius & Fahrenheit
  
  • Optional temperature sensor probe (excluded)
    
• Auxiliary battery to power watt meter for measurement down to 0V
  • Optional Auxiliary battery probe (excluded)
    
• Accurate & precise – 0.01 A current and 0.01V voltage resolutions
• Rugged – handles 50A continuous and 100A peak at 60V
• Small & light with a tough plastic case
• Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance
• Factory calibration stores constants in EEPROM to compensate for component tolerances