About Payment 
 Shipping & Cost
 Battery SDS
 Battery Terminology
 Battery Knowledge
Privacy Policy
 Export restrictions


Shopper Award

Security Verified Seal

LiNiMnCo 26650 Battery pack: 7.4V 8Ah (59.2Wh, 5A rate) with PCB (4.8)

Your Price: $64.95
In Stock

Product ID # 5625
Part Number:

Lead Time: 5 Business Days!


*Important Shipping Regulation This pack is for testing (prototype) only. It has not been UN38.3 tested yet.  Read more...
Voltage 7.4 V (working)   8.4 V ( peak)  5.0 V ( cut-off) 
Capacity 8.0Ah (59.2Wh)
  • Charge/Discharge terminal: 6" long 18 AWG  open end wire
    • Red = Positive
    • Black = Negative
  • 1x PCB (5A limited) installed with the  battery pack and protects the battery from
    • Overcharge (> 8.4 V)
    • Over discharge  (<5.0 V)
    • Over drain ( >9 Amp)
    • Short circuits
Cycle life 80% of initial capacity at 1000 cycles
Charging rate 5A Max
Discharging Rate 5A  Max limited by PCB
Dimensions(LxWxH) 114mm(4.5") x 30mm (1.2") x 75 mm (3.0").  
Weight 390  grams (0.9 Lb).


  • 7.4VDC device with 9.0A Max drain rate
  • Replace 6.0V NiMH and Lead acid battery with much longer cycle life
  • If you connect two of these modules in parallel, you can build a 7.4V 16Ah Battery pack with a 18 Amp discharge rate. (must use correct wire gauge)


  • 7.4V LiMnNi battery pack shall be cut-off at =<8.4V ( <=4.2V/cell ) during charging and >=4.0V ( >=2.0V/cell)   during discharging  
  • We are not responsible for any damages or losses caused by misuse (included but not limited to: improper charging/discharging, any changes of this battery pack, miss-assembling battery packs)
  • Always pay attention when charging the battery pack. Battery shall put in a place or container with fire - proof to avoid any accident
  • Please always check battery polarity before connection to device. Never make wrong polarity connection
  • For safety warning please see the link here 

Related Products

Related Products

Product Reviews

(0 Ratings, 0 Reviews)
What to consider when designing Lithium Batteries?
Bluetooth Technology for Lithium-ion/LiFePO4 Batteries
UN 38.3 Safety Test

We own a national standard UN38.3 testing lab. We can provide UN38.3 test service to our customer.

If you want to set up your own lab, we also provide UN38.3 & IEC62133 equipments and onsite training. Email us for the quote and lead time.
Lithium Battery Shipping Regulation
Recommendations on How to get ≤30% Rated Capacity for Shipping
Thermal Abuse Test for IEC62133
Mailing Lists