|
LiFePO4 Prismatic Module: 3.2V 200 Ah, 10C Rate (640 wh), UN Approved (DGR)
|
|
In Stock
Product ID # 6064
Part Number: LFP-G200Ah
UN Doc Valid Till: 03/22/12
|
| Chemistry
|
LiFePO4 in prismatic case
|
| Nominal Voltage
|
Average 3.2 V (working) 3.65V-3.8V (peak ) 2.5 V ( cut-off low)
|
|
Capacity
|
- 200Ah (640 wh)
- Energy density: 112.28Wh / Kg
|
|
Charging current
|
- Standard charging current 0.3 - 1C rate (100A)
- Best charging current <3C (500A)
|
| Discharging current
|
- Constant discharge current: 600A (3C rate)
- Impulse discharge current (<10sec): 2000A (10C rate)
|
Terminal
|
|
| Dimension(LxWxH)
|
142mm(5.6") x 57mm(2.24") x 500mm(19.7")
|
| Weight
|
5.7kg (12.0 lbs 8.0 Oz)
|
| Operation Temperature
|
- Charging: 0°C (32°F) - 45°C(113°F)
- Discharging: -25°C (-13°F) - 75°C(167°F) 90% at rated capacity at 1C discharge
- Self-discharging <3% monthly
- Temperature Durability of case =< 200°C(392°F)
|
| Cycle Performance
|
2000 (80DOD%@0.2C rate, IEC Standard)
|
| Applications
|
small EV or big robot
|
| Detail Data Shee
|
|
| Smart charger
|
|
|
Cautions
|
-
This LiFePO4 3.2V module does not have PCM for protection. Do NOT discharge battery below 2.5V, and always store battery above 3.0V
-
To form a high voltage battery pack, please choose our
 advanced LFP BMS to monitor and control each module for safety and long service life
-
|
| Warranty
|
|
What are the advantages to these cells compare to LFP-P200Ah?
- The Positive and negative terminals on these cells are placed on opposite ends of the cell. This make the current density more uniform within the cell to prevent current crowding near the terminals. This increases the performance and reduces the chance of premature aging due to hot spots within the battery. Not only does this result in lower internal resistance, but greater high current performance and superior cold weather performance.
- Officially rated for 3.0C continuous discharge, lab testing has shown that these cells can deliver 100% of rated capacity when continually discharged at 4.5C (900A)
- At -20°C (-4°F) these cells are capable of delivering 90% of their rated capacity (1.0C discharge)
- Cells utilize a patented dual safety valve design which can safety with stand any abusive conditions. Tests have been done to confirm that these cells will not explode or catch fire during any of these tests. These include penetration with a steel rod ( a dead terminal short), crushing, short circuiting, dropping, over-charging, over-discharging and extremely high and low temperature storage.
- Large terminal have 4 screws or rivets. This design reduces the possibility of a loose connection and eliminates the possibility of loose connection rotating compare to the one large screw on the LFP-P200AH (which is an earlier version battery)
|
|
|
|
|
MSRP Price: $1,600.00
Your Price: $1,470.00
You Save: $130.00 (8 %)
|
| |
Product Reviews
|
|
|