|
LiFePO4 18650 Battery: 6.4V 3000mah (Flat, 19.2Wh, 7.0A rate ) with PCB & Polyswitch (1.8)
|
|
In Stock
Product ID # 3783
Part Number: LF-H1P2S2R1WR
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $36.81 |
| 21 to 50 | $36.05 |
| 51 to 100 | $35.29 |
| 101 or more | $34.16 |
|
| Packing
|
- 6.4 V 3000mAh LiFePO4 Li-Ion rechargeable battery Module is made of 4 pcs of LiFePo4 1500 mAh cylindrical 18650 cells in a flat pack
- Shrink wrapped and packed side by side with 2 series and 2 parallel (2S2P)
|
| Voltage
|
Voltage: 6.4 V (working) 7.6 V (peak) 5.0 V ( cut-off)
|
| Capacity
|
3000 mAh
|
| Cycle Life
|
> 1000 cycles (80% of initial capacity @ 0.2C rate, IEC Standard)
|
| Protection
|
- One PCB (10A limited) installed with the battery pack and protects the battery from
- Overcharge (>7.7V)
- Over discharge ( <4.46 V)
- Over drain ( >10 Amp)
- Short circuits
- One 7.0 Amp polyswitch installed to limit max. discharging current and to protect wrong polarity
|
| Prewired
|
6" 18 AWG open end wire
|
| Charging rate
|
1.2 A ( recommended ), 1.35 A max.
|
| Max. Discharging Rate
|
7.0 Amp limited by polyswitch ( lower rate available upon request )
|
| Dimension (LxWxH)
|
75mm(3.0") x 72mm (2.8") x 21mm(0.8")
|
| Weight
|
6.0 oz / 170g
|
| Smart Tips
|
- You may choose our 1.2 A Smart charger for 6V LiFePO4 pack to recharge this battery pack. The estimated charging time is 3.52 hours
- If connect two modules in parallel, you can build a 6.4V 6.0 Ah Battery pack with a 14 Amp discharge rate.
|
| Applications
|
- Replace 6V NiCd and NiMH battery packs for higher energy density
- External battery pack to run 6V DC devices, such as digital camera with max current drawn 7.0A rate.
|
| Warning
|
- 6.4V LiFePO4 battery pack shall be cut-off at 7.6V during charging and 5.0V during discharging
- Please click Knowledge on LiFePO4 batteryto learn more detail
-
|
|
Product Reviews
|
|
|