|
Li-ion 14500 Cylindrical Rechargeable Cell: 3.7V 750mAh (AA size, 2.77Wh)- UL Listed / UN approved (0.23)
|
|
ETA by early May'12
Product ID # 1336
Part Number: LC-14500
* denotes required field
Tab Options*
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $3.44 |
| 21 to 50 | $3.37 |
| 51 to 100 | $3.30 |
| 101 or more | $3.20 |
|
- Features:
- AA Li-Ion rechargeable battery 3.7V 14500 size Cylindrical Li-Ion Cell, same size as AA 1.2V rechargeable NiMH and NiCd battery
- No memory effect and longer storage life than NiMH Batteries
- Lighter weight and higher energy density than any other rechargeable battery
- 14500 cell has same size as an AA size battery, but has 3 times higher voltage.
- It is perfect for building battery packs for RC aircraft, RC cars, and RC robots.
- Can use special PCB ( protection IC) to build 14500 battery pack.
Specifications:
| Nominal Voltage
|
Average 3.7 V
|
| Nominal Capacity
|
750 mAh,
|
| Max.Charging current
|
0.75 A Max.
|
| Max. Discharging current
|
1.9 A (2.5c)max.
|
| Dimensions (DxH)
|
14mm (0.55") x 50mm (2.0")
|
| Weight
|
0.8 oz (23g)
|
| Internal Impedance
|
Internal Impedance: less or equal to 80 milli-ohm (with PTC)
|
| Cycle Performance
|
80% of initial capacity at 300 cycles
|
| Detail Data Sheet
|
 Download spec
Download MSDS
|
|
Cautions
|
- Li-Ion Batteries may explode if charged or discharged improperly.
- You must possess knowledge of electronic and understand how to handle Li-Ion battery.
- We reserve the right not to sell and void the warranty it you don't meet the above statement.
- You must use a protection IC (PCB) to keep battery from overcharge and over discharge
- Never solder directly onto the Li-Ion battery as overheat might cause battery to explode. If you are making a pack or need to solder batteries together, you need to get battery with tabs on it. You must solder to tabs instead directly onto the battery.
- Please read more safety warning about Li-Ion battery
|
| Optional
|
- For DIY, you may add tabs as an option at a little extra cost
- You may choose our smart charger to charge single 14500 cells
- If you DIY by yourself, you MUST install Our PCB or your own PCB with the following feature:
- 4.2V/cell over-charge protection
- 2.5V/cell over-discharge protection
- Max current over-drain protection
- Short circuit protection.
- Batteryspace.com won't liable for any mis-use due to any other brand of PCB applied
- If you don't know how to make Li-Ion pack, please don't DIY, click here to choose a prewired Li-Ion pack module from 3.7V-37V
|
| Applications
|
- Utility metering
- Automatic meter reading
- Alarm and security device
- Memory back up
- Tracking system
- RC Cars and RC aircraft batteries
|
|
Product Reviews
| (1 Rating, 1 Review) |
Average Rating:
|
one 14500 replace 3 AA in my DSLR
Customer104065
(Unknown)
4/20/2008 5:31 PM
This is a very robust product. I am always carrying my Pentax DSLR with me. It is using a 4-AA battery to power up. After checking the wire connection, I easily/sucessfully illiminate 3 AA with this 14500 Li-Ion battery. One 14500 with one AA has the same voltage output as 4 AA, and they last as long as the normal AA configuration. Another nice thing about this combination is that I can always charge the 14500 with a smart charger and extending the usage time of the AA. Also, only one backup 14500 battery is needed when I go out for shots, instead of 4 AA. It has been one year now. I am very pleased with this product, and no sign of capbility drop of my 14500. Well done, batterspace.com.
|
|
|
|