High Power Polymer Li-Ion Battery: 37V 10Ah in Plastic Enclosure (370Wh, 30A Rate, Side Plug) 30A Rate + 3.0A Smart charger+Bag (30.0)

• High Power Polymer Li-Ion Battery: 37V 10Ah in Plastic Enclosure (370Wh, 30A Rate, Side Plug) 30A Rate + 3.0A Smart charger+Bag
• The state art of PCM is installed the pack to protect battery from over-charged, over-discharged and over-drained
• Battery pack is placed in Plastic Enclosure: 200 x120x75 (mm) 
• 10 AWG wire inside to carrying 40A current
• Two heavy duty cylindered connectors are installed in outside box (Red positive ) to carry 40 amp current
• Included one Digital Camera Bag 5.5x4.5x7.5
• Included one 3.0A  37V Smart Li-Ion battery charger 

• One PCM (30A limit) with balance function is installed in the battery pack to balance charging and protect battery module from
  • Over discharge beyond 42V
  • Over discharge below 25V
  • Over drained beyond 30 A
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Discharge terminal: Copper Barrel Lug terminal attached via Binding Post
  • Barrel Lug terminal size: 0.6"(14mm) L x 0.3" (8mm) W x 0.04" (1mm) H
  • Binding Post size: 0.8"(19mm) Dia x 1.2"(30 mm) L
    • Red Binding Post = Positive
    • Black Binding Post = Negative
  • Must use proper AWG wire gauge to match up the max discharge current (40A), Please click here for American Wire Gauge table and AWG Electrical Current Load Limits table. You may consider to DIY with our wire below.
    • 10AWG Red wire and 10AWG Black wire. 
    • 12AWG Red wire and 12AWG Black wire.
• Charge terminal: 5" long Standard Tamiya Male plug

• LxWxH: 200mm x 152mm(6.0") W x 3.0"(75 mm)  
  • W is the length with Binding Post's length

•  You shall choose our 3.0A  37V Smart Li-Ion battery charger  to recharge this battery pack.  The estimated charging time is about 5.0 hours. 
  • Warning:  Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
• If you connect two of these modules in parallel, you may build a 37 V 20 Ah Battery pack with a 60 Amp discharge rate with suitable wiring
• Optional for Fire Retardant Bag: 295mmx230mmx75mm. Please click here to buy separately here.
• Included one Digital Camera Bag 5.5x4.5x7.5

• Replace 36V NiMH battery pack with much lighter weight  for e-bike
• RC robot and RC aircraft which need high current drain
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know the advantages

• Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing
• Please never discharge the battery pack beyond its Max. rating
• Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
• For safety warning please see the link here

Please see our real time testing when attached the pack to e-bike ( 36V 600W conversion kit)

   Please click here to download the Video Clip file1  (37V 8Ah Polymer Li-Ion pack installed with e-bike )

   Please click here to download the Video Clip file2  (using a watt-up to monitor drain current during riding at 30A )

• Download user manual.