High Power Polymer Li-Ion Battery: 37V 10Ah (370 Wh, 30A rate, Ebike Terminal) in Plastic Enclosure (30.0)

• High Power Polymer Li-Ion Battery: 37V 10Ah (370 Wh, 30A rate, Ebike Terminal)  in Plastic Enclosure
• The state art of PCM  is installed the pack to protect battery from over-charged, over-discharged and over-drained
• Battery pack is installed in Plastic Enclosure: 200 x120x75 (mm) (10-22)
• Fuel Gauge for PCB of 37.0v Li-Ion Battery Pack (10 cells pack) is installed on surface of battery pack
  • Touch the switch on the display , you can monitor the energy level of battery pack 

• One PCM (30A limit) with balance function is installed in the battery pack to balance charging and protect battery module
  • Over discharge beyond 42V
  • Over discharge below 25V
  • Over drained beyond 30A
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Charge terminal: 4"long 20 AWG with standard Male Tamiya plug.   
• Discharging terminal: Discharging terminal:7" 12 AWG wire with standard E-bike connector which fits with BL-600 e-bike kit
  • Red (Large female Pin) = Positive
  • Black (Small female Pin) = Negative 

     210mm (8.3") x 120mm (4.8") x 75mm (3.0")  

• Please use either 37V Li-Ion smart charger below. 
  • For fast charging (3.0 hrs) , You may use5.0A Smart Li-ion battery charger + the connector adaptor
  • You can choose our 3.0A 37V Smart Li-Ion Battery charger to recharge this pack. The estimate charging time is about 5.0hrs.
  • Smart Charger (1.9A, CE listed, UL approved) for 37V Li-ion/Polymer Rechargeable Battery Pack.The estimate charge time is about 7.9hrs
  • Warning:  Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
• If you connect two of these modules in parallel, you may build a 37 V 20 Ah Battery pack with a 60 Amp discharge rate with suitable wiring
• Optional for Fire Retardant Bag: 295mmx230mmx75mm.Please click here to buy separately.
• Optional Quality Multi Departments Bag 5.5x4.5x7.5" Please buy separately here.

• Replace 36V NiMH battery pack with much lighter weight  for e-bike ,
• Pefect fit for Sakura Mustang Electric Chopper .
• For RC robot and RC aircraft which need high current drain
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know the advantages

• Please note this battery is for R&D use only and NOT for individual customers. We are not responsible for any damages or losses caused by misusing
• Please never discharge the battery pack beyond its Max. rating
• Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
• For safety warning please see the link here
• 

Please see our real time testing when attached the pack to e-bike ( 36V 600W conversion kit)

   Please click here to download the Video Clip file1  (37V 10Ah Polymer Li-Ion pack installed with e-bike )

   Please click here to download the Video Clip file2  (using a watt-up to monitor drain current during riding at 30A )