High Power Polymer Li-Ion Battery: 37V 10Ah in Plastic Enclosure (370Wh, Side Plug) 30A Rate + 3.0A Smart charger

• High Power Polymer Li-Ion Battery: 37V 10Ah in Plastic Enclosure (370Wh, Side Plug) 30A Rate
• The state art of PCM is installed the pack to protect battery from over-charged, over-discharged and over-drained
• Battery pack is placed in Plastic Enclosure: 200 x120x75 (mm) 
• 10 AWG wire inside to carrying 30A current
• Included one 3.0A  37V Smart Li-Ion battery charger 

• One PCM (30A limit) with balance function is installed in the battery pack to balance charging and protect battery module from
  • Over discharge beyond 43.25V
  • Over discharge below 25V
  • Over drained beyond 30 A
  • Maximum continues discharge rate 30A
    
  • Must wait min of 30 minutes after battery is fully charged to allow the pcm to perform balance function on all the cells within the pack.
• Discharge terminal:6" 12 AWG wire with standard E-bike connector which fits with BL-600 e-bike kit
  •  Red (Large female Pin) = Positive
  • Black (Small female pin) = Negative
    
• Charge terminal: 5" long Standard Tamiya Male plug

• 210mm (8.3")L x 120mm (4.8")W x 75mm (3.0") H 

•  You shall choose our3.0A  37V Smart Li-Ion battery charger  to recharge this battery pack.  The estimated charging time is about 5.0 hours. 
  • Warning:  Please wait 30 minutes after charged to allow PCM to balance the cells to achieve the best performance
• Optional for Fire Retardant Bag: 295mmx230mmx75mm.Please click here to buy separately here.

• Replace 36V NiMH battery pack with much lighter weight  for e-bike
• RC robot and RC aircraft which need high current drain
• Please click here to see the Comparison Poly-Li pack vs NiMH / SLA to know the advantages

• Please never discharge the battery pack beyond its Max. rating
• Must read before place an order. Please download fill the form and fax back to 510-439-2808. Attn: BatteySpace-Tech.
• For safety warning please see the link here

Please see our real time testing when attached the pack to e-bike ( 36V 600W conversion kit)

   Please click here to download the Video Clip file1  (37V 10Ah Polymer Li-Ion pack installed with e-bike )

   Please click here to download the Video Clip file2  (using a watt-up to monitor drain current during riding at 30A )

• Download user manual.
•