External Battery Pack - NiMH 6V 4500mAh with Smart Charger for Digital Camera, Keep Your Camera Flashing!

• Designed as external battery pack for the most 6-7.4 V input digital camera and give you more than 1000 shots per charging.
• Made by 5 Pcs high quality 4500mAh Sc size NiMH cell, can be recharging for more than 500 times
• Voltage: 6.0V at working and 7.25V at peak
• 1 pc 420 Polyswitchfor limit max current drawn @ 4.2A
• Max. discharging rate:   4 A
• 1 pc 65^o Thermostat in charging terminal to protect battery from overcharged
• 50% more capacity thanMahaPowerEx2200mAh PowerBank,but at 50% lower price .
• Dimension: 5.0" (127mm) x 1.6" (41mm) x 1.0" (25.4mm) 
• Weight: 10oz (283g)
• compact size and light weight which can be stowed in a leather bag with belt clip.
• IncludedMulti Current Smart Charger for 4.8V-10.8V NiMH/NiCd battery pack + connector adaptor to recharge the battery pack. The charging time is around 2.7 hours by 2.0A charging current
• Must connect with correct polarity. Plug Large male pin to Large female pin, Small male pin to Small female pin
  
• Charge/Discharge terminal: 5" cable with a female universal connector
  
• One set of 8 detachable dc male plug tips is included for connecting the battery pack to your device.
• The external battery can be used for most popular brand camera which has 6-7.4V DC put jack and round plug tips, such as Nikon Coolpix 995, 880, 885, 775, Olympus E-10, E-100 and HP Photosmart C618, C912 cameras  etc
• Before purchasing the battery,  please check (1) If your DC input is between 4 - 5V  (2) If  one of  8 plug's diameter listed in below can fit your camera.
• Need portable bag? Please click here to order seperately.

Operation Procedures:

1. Plug battery connector ( 2 pins male ) to charger's connector ( 2 holes female)
2. Plug Charger AC power cable to wall  ( 110V only) 
3. Then disconnect battery pack from charger after charging 12-15hrs.
4. Choose a right size plug tip, push two pins on the plug into two holes from female connector on the battery.  ( Note: two pins, larger diameter one  is positive )
5. Push the plug into your camera.  ( If can not fit in, please choose a right one)
6. Put the external battery case into your belt, then you are ready to shooting.