|
Multi-Current Smart Charger ( 1-2 A ) For 4.8V - 10.8V NiMH / NiCd Battery Packs with 5.5x2.1mm Barrel Male connector - UL Listed
|
|
In Stock
Product ID # 6022
Part Number: CU-J437
Need 5 business day to build!
Quantity Discounts
| Quantity | Amount |
| 5 to 20 | $30.99 |
| 21 to 50 | $30.35 |
| 51 to 100 | $29.71 |
| 101 or more | $28.76 |
|
| Features
|
- Customize Universal Fast and Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 4.8V - 10.8V , e.g. 4 to 9 cells pack
- With a 5.5x2.1mm Male Barrel Plug
- LED flashing red-green-red before charging in order to test the IC of the charger if ready to use.
- It is a very smart charger. Just plug it in and wait for the battery to get charged. Red LED indicating charging, and Green LED means fully charged
- Short circuit protection: No output voltage from the charger if the battery is not connected.
- 120-240V AC input for worldwide use.
|
| Specs & Functions
|
- Detect battery pack voltage (from 4.8 - 10.8V) and choose proper charging voltage automatically
- Cut-off power automatically by negative delta V IC when battery pack is fully charge.
- Built in IC Protecting battery from over current, short circuit & reverse polarity.
|
| Charging Current
|
Two current levels, 2A and 1 A, are selectable by a switch for both high capacity ( > 2100mAh) and low capacity battery pack ( < 2000mAh)
- For battery pack between 1000 mah and 2000 mah, please use the low level switch -- charging rate: 1 A
- For battery pack over 2000 mAh, please use the high level switch -- charging rate: 2A
|
| Charging time
|
The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow:
Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 1A or 2 A )
|
| Dimension
|
1.5"H X 2.5"W X 5.5"L
|
| Weight
|
9.6 Oz (272 grams)
|
| Certificated
|
|
| Precautions
|
- Please don't use the charger to charge battery pack with capacity less than 1000 mAh
- If you have question on what current setting to use, please check the battery specification to find out what is the maximum charging current before selecting the charging current.
- The charger is designed for indoor use only.
- The charger should be horizontally positioned and work in well ventilated condition, avoid moisture and keep it away from inflammable explosive goods.
- Ambient temperature shall not be more than 40 degree C when using the charger
- Remove the AC power before connect or disconnect the charger with batteries.
- Don't try to disassemble the charger.
|
|
Product Reviews
|
|
|