• Easy to use. More accurate calibration and higher effective resolution 
• Perform tests like a pro!
• Microsoft® Windows® XP through Vista® certified, with Windows® 7 support
• Analyze exact battery characteristics.
• Optional for Temperature Sensor 
• Match cells or pick the best pack.
• Check for battery aging.
• Test at up to 150 watts or 40 Amps @ < 3.7V
• Standarad Anderson Attached, made by Standard Anderson Connector Red Housing (1327)  & Standard Anderson Connector Black Housing (1327G6)
  • Include one  3" long Standard Anderson connector for connect to your battery 
• Software is included for Computer controlled discharging with precision graphic

Descriptions:

• Plug and Play high speed USB interface, with easy to use and intuitive Windows software supplied on CD ROM.
• Scientifically analyzes battery performance with a true constant current battery capacity test that is graphically displayed.
• Perform tests quickly at real world load conditions, up to 150 watts or 40 amps maximum, whichever is higher!
• High voltage testing at up to 48 volts; the equivalent of 1 to 38 NiCad or NiMh cells.
• Save, display and print battery test graphs and battery labels.
• Measures and displays voltage, current, amp-hrs, watts and temperature*.
• Easy overlay comparisons of multiple graphs may be displayed saved and recalled.
• Test any type of battery: NiCad, NiMH, Lead Acid, Li Ion, Li Poly, Alkaline, Carbon Zinc, Mercury etc; from coin cell to automotive or larger.
• Accurate measurement with up to 12 bit resolution. Auto selection of two current and three voltage ranges.
• Each CBA is individually, digitally calibrated, against NBS traceable instruments.
• On board C8051 based USB Micro controller.
• Superior constant current testing , software and electronically regulated, using a solid state FET fan cooled electronic load.
• Automatic test shut off at a safe pre-determined minimum battery voltage. Default shut off voltage may be user overridden.
• Automatic test shut off at a pre-determined maximum battery temperature. (Requires optional temperature probe)
• Fail safe: software and/or hardware protection of temperature, current, power.
• Supplied with USB cable and high grade 13 gauge flexible Powerpole battery test cable. Optional battery connectors available.
• Optional external temperature sensor provides measurement of battery temperature for automatic shutoff on over temperature.
• Discharge test current user selectable from 0 to 40 Amps.

Specifications:

• Maximum continuous discharge rate: 100 watts
• Maximum limited term discharge rate with < 3500 ma-hour battery: 125 watts
• Maximum limited term discharge rate with < 1000 ma-hour battery: 150 watts
• 0-3 amp accuracy: typically better than + - 10 ma 
• 3-40 amp accuracy: typically better than + - 45 ma 
• 0-5 volt accuracy: typically better than + - .005 volts 
• 5-10 volt accuracy: typically better than + - .01 volts 
• 10-50 volt accuracy: typically better than + - .05 volts 
• Absolute maximum operating voltage: 48 Volts
• Maximum discharge rate: 40 amps (3.75 Volts at test start) (Battery dependant)
• Minimum Voltage for a 40 amp discharge: 2 volts at completion of test (Battery dependant)
• Minimum discharge rate: 0.1 Amps
• Residual current drain, battery connected while not in use: < .003 amps @ 12 volts
• User selected battery cell chemistry, number of cells and test current, with automatic graph setup and scaling.
• High performance C8051 based micro controller with built in USB interface and 10 bit A/D conversion.
• USB powered; the CBA does not use the battery being tested to run the CBA or the fan.
• Software calculates and recommends safe tests based on the user supplied battery information.
• Supplied with USB cable, Powerpole battery connectors and Windows compatible software CD with full documentation.
• System ready and Test in progress LED indicators, viewable from across a room.
• Automatic voltage shut off at end of test using a software recommended or user selected safe discharge voltage.
• Automatic temperature shut off at end of test at using a software recommended or user selected maximum temperature.
• Optional external magnetic temperature sensor required for temperature measurement and/or battery auto over-temp shutoff.
• Internal automatic self protect over temperature shutoff.
• Graph printing on any standard color or B&W printer.
• Battery test label printing on standard 05160 stick-on labels.
• Dimensions: 3.5" H x 2.8" W x 3.6" D.
• Weight: 1.0 lb (454 grams) 

Computer System Requirements

• Minimum Requirements:
  • A PC with a Pentium 233 or better.At least an 800 X 600 graphics card and display monitor
  • 98SE, W2K, XP, Vista®: 32 or 64 bit, Windows® 7: 32 or 64 bitAn available USB port 
  • Recommended:
     
     
  • AMD or Intel 1.2 GHz or better
  • Better than 800 X 600 graphics and display monitor
  • Windows® XP or Vista® 32 or 64bit 1 GB RAM

  • An available USB port (external hubs not supported) 

     
     
• For graph and label printing:
  • Any Windows compatible, laser or ink jet, color or black and white, printer.
    Avery 05160 labels are required for label printing.

Smart Tip:

• To charge a battery pack, please click here to choose Battery Pack Chargers 
• Combining a amplifier ( see related product) with this battery analyzer, you can discharge and analyze battery up to 500W ( 120A) via a computer
• FAQ:  ( please click here to see)                                         
•  Software Version 2.1 User Manual:  ( please click here to see)
• Click Here to Download Software Version 2.1